Introduction; Intro; General; How To Use The Manual - Honeywell LMB HYPER 120-03 Component Maintenance Manual With Illustrated Parts List

TASK 21-22-91-871-801-A01
1.

Introduction

A.

General

(1) This component maintenance manual (CMM) agrees with the Air Transport Association (ATA)
iSpec 2200, and it is written in AECMA Simplified English (European Association of Aerospace
Industries).
(2) This CMM gives the procedures necessary to do easy checks and replacement of parts and
components. It also gives the procedures for maintenance. The maintenance procedures given
in this CMM are only for approved persons with the necessary skills.
(3) This CMM gives the shop maintenance procedures of the component.
(4) This manual uses the identification of the tasks and subtasks which is defined in the
Maintenance Task Oriented Support System (MTOSS). The maintenance tasks and other data
have special MTOSS numbers for the use of Electronic Data Processing (EDP). The user of the
manual can ignore the MTOSS numbers.
(5) This manual contains:
– the technical data for the component,
– the maintenance and repair procedures for the component,
– an Illustrated Parts List (IPL) with the data for the component parts. The parts are identified in
all the Page Blocks of the manual, by the IPL Figure and the item number.
(6) A check of the DISASSEMBLY, TESTING and ASSEMBLY procedures in the workshop.
B.

How to Use the Manual

(1) Make sure the manual contains the applicable data for your component. Look for the part
number on the Title Page.
(2) To identify a part or to find a part number, refer to the IPL, which has an Introduction to show
the procedure.
(3) You must use the instructions in this manual, for all the maintenance steps of a component.
Read all the applicable WARNINGS and CAUTIONS before you do the work on the component.
(4) When you use consumable materials, these materials are identified by a code number which is
listed in the Consumable Materials Table.
(5) When you use special tools, these tools are identified by a code number which is listed in
the Special Tools Table.
(6) For the tightening torque values of the parts, refer to the Table of Tightening Torques.
C. Related Publications
(1) Acceptance Test Repair Data Sheet (ATRDS)
(a)
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
The test operator uses this sheet to record the test values during the test steps.
00001059
INTRODUCTION
21-22-91

INTRO

Page 1
Dec 15/06