1: 5880 Board Layout; 2: 5880 Connection To Panel - Honeywell 6808 Installation And Operation Manual

4.9.1 5880 Board Layout
Figure 4.30 is a picture of the 5880 board showing locations of screw terminals for connection to the panel and contact monitor wiring;
pin connectors for connecting LEDs; and the DIP switch for selecting an SBUS ID number.
4.9.2 5880 Connection to Panel
The 5880 connects to the panel via the SBUS. Make connections as shown in Figure 4.31. After the 5880 is connected to the panel, it
must be added to the system. This programming step is described in Section 4.11.
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
Figure 4.30 5880 Board Layout
Figure 4.31 5880 Connection to Main Control Panel Assembly
Dry Contact Inputs - Supervised/Power Limited
SBUS Connection
Supervised
Power Limited
Control Panel Installation
SBUS Address
DIPs
43