Honeywell 6808 Installation And Operation Manual page 121

Operation
Occurs When
Mode
The system
detects a
supervisory
condition.
Supervisory
The system
detects a
supervisory
condition with
a CO detector.
A system
trouble
condition
occurs.
Trouble
A trouble
condition with
a CO detector
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
System Behavior
The communicator seizes control of the
phone line and calls the central station.
The on-board annunciator sounds a loud,
pulsing beep in the sequence one second
on, one second off.
SUPERVISORY LED flashes.
The LCD displays a screen similar to this
one.
The communicator seizes control of the
phone line and calls the central station.
The on-board annunciator sounds a loud,
pulsing beep in the sequence one second
on, nine seconds off.
SYSTEM TROUBLE LED flashes.
The LCD displays a screen similar to this
one.
Table 10.1 Operation Mode Behavior
In This Mode You Can
Press down arrow to view the supervisory condition. A
screen similar to this one displays.
Press SILENCE and enter an access code (or activate
the key) to silence the annunciator. Once the
supervisory condition has been corrected, the system
will restore itself automatically.
Press down arrow to view the trouble. A screen similar
to this one displays.
Press SILENCE and enter an access code (or activate
the key) to silence the annunciator.
Once the trouble condition has been fixed, the system
will restore itself automatically.
System Operation
121