Compatible Products - Honeywell 6808 Installation And Operation Manual

Input Point
Input Zone
Output Point (or Output Circuit)
Group (or "Output Group")
Output (or "Cadence") Pattern
Mapping
Common Communication Link
SWIFT

1.3 Compatible Products

The table below lists the products available from Honeywell Silent Knight for use with the 6808.
Type of Device
SK
Addressable
SLC Devices
SD
Addressable
SLC Devices
SWIFT
Wireless SLC
Devices
Other Modules
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
Term
An addressable sensing device, such as a smoke or heat detector or a contact
monitor device.
A protected area made up of input points.
A notification point or circuit for notification appliances. Relay circuits and
auxiliary power circuits are also considered output points.
A group of output points. Operating characteristics are common to all output
points in the group.
The pattern that the output will use, for example, Constant, March Code, ANSI
3.41. Applies to zones and special system events. See Appendix D for additional
information.
Mapping is the process of specifying which outputs are activated when certain
events occur in the system. Section 8.2 explains mapping in detail.
Up to 17 panels can be linked. Consist of any combination of 17 panels of these
model numbers:6700, 6808, 6820 / 6820EVS. For reporting purposes only. Not a
peer-to-peer networked system.
Smart Wireless Integrated Fire Technology
Table 1.1 Manual Terminology
Model
See Section Section 7.1 for a list of compatible devices.
See Section Section 7.2 for a list of compatible devices.
See Section Section 7.3 for a list of compatible devices
5824 Serial/Parallel Printer
Interface Module
5496 (Rev F or higher) NAC
Expander
5895XL (Rev F or higher)
power supply
5860 and 5860R LCD
Annunciator
6860 LCD Annunciator
6855 LCD Annunciator
5860TG and 5860TR Trim Ring Trim ring kits for surface mounting the 5860 annunciator. 5860TG is gray;
5865-3 and 5865-4 LED
Annunciator
5880 LED I/O Module
5883 General Purpose Relay
Module
SK-NIC
SK-FML
SK-FSL
Description
Allows a printer to be attached for the on-site event logging. Maximum of four
5824s per control panel.
Add 4 Notification/Auxiliary power circuits with
each 5496 NAC Expander.
Provides additional power, six Flexput
and two Form C relays. See Model 5895XL
Installation Instructions P/N 151142.
4x20 LCD fire annunciator. 5860 is gray; 5860R
is red.
4x40 LCD remote fire annunciator
4x20 LCD remote fire annunciator
5860TR is red.
LED annunciator can display up to 30 LEDs (15
red and 15 yellow). 5865-4 has key switches for
silence and reset, and a system trouble LED.
Driver for up to 40 LEDs. Interfaces with
customized annunciator boards. In addition the
5880 has eight generic switch input points.
Provides 10 Form C relays. Designed to be driven by the 5880. Up to four,
5883s can be used with each 5880 module.
Network Interface Card
Fiber-Optic Multi Mode, Receiver
Fiber-Optic Single Mode, Transmitter
Description
5496 & 5895XLs can be
used in any combination,
up to a total of 8 devices on
®
circuits,
one panel.
Up to 12 5860, 6860 or
6855s per system.
5865-3, 5865-4, and 5880
can be used in any
combination, up to a total of
eight devices on one panel.
Refer to LS10172-001SK-E
Refer to LS10178-001SK-E
Introduction
11