Flush Mounting - Honeywell 6808 Installation And Operation Manual

Flush Mounting

This section of the manual describes flush mounting. Follow these steps to flush mount the 6860
1. The back box dimensions are 9¼" W x 8 3/8" H. The minimum depth required is 2". The back box can be mounted prior to the
complete installation of the 6860 using any of the mounting holes shown in Figure 4.22.
2. Remove knockout holes as needed for wires. See Figure 4.23 for backbox knockout locations.
3. Wire the annunciator board to the main control panel. As described in Section 4.5.2.
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
Figure 4.22 Back Box Mounting Holes
Wire Knockouts
Figure 4.23 Back Box Knockout Locations
Mounting Holes
Mounting Holes
Wire Knockouts
Control Panel Installation
Wire Knockouts
39