Honeywell 6808 Installation And Operation Manual page 123

When Single or Double Interlock Zone releasing is selected using the HFSS Honeywell Fire Software Suite, the software suite will auto-
matically default the following system parameters:
NOTE: The defaults created can be modified through programming if desired.
• Output Group 2 is created. Output Group 2 will be defaulted as a "Detector Alarm" output group for all releasing zones. NAC
[98:001] is assigned to Output Group 2.
• Output Group 3 is created. Output Group 3 will be defaulted as a "Interlock Release Alert" output group for all releasing zones.
NAC [98:002] is assigned to Output Group 3.
• Output Group 4 is created. Output Group 4 will be defaulted as "Interlock Release Alarm" output group for all releasing zones.
NAC circuit [98:003] is assigned to Output Group 4.
NOTE: The installer must define which input points will be used for detectors, manual release switches, or interlock/pressure switches.
NOTE: For manual release operation, Installer must use an FM approved/ UL listed releasing manual station
Manufacturer
Asco
Honeywell/Skinner
Barnbrook System
Kidde Fenwal
Minimax
Nohmi Bosai
Parker Hannifin
Snap-tite
TLX
Versa Valves
Victaulic
Viking
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
Part Number
T8210A107
8210G207
HV2740607
HV2838521
HV2740608
701X7028
EA45
890181
486500
895630
897494
88 7363
88 5738
88 9323
R85M10
70610006
10610707
2823A-2NB-A4F6
2823A-2NB-A4F5
PA0036-A
CGS-4232-NB3-S2
753E
767
11591
11595
11592NC
16360
Table 10.2 Approved Releasing Solenoids
Rated Voltage, Rated Current,
DC
24 VDC 700
24 VDC 442
24 VDC 375
24 VDC 375
24 VDC 375
24 VDC 917
24 VDC 200
24 VDC 2000
24 VDC 290
24 VDC 2000
24 VDC 1500
24 VDC 1040
24 VDC 1040
24 VDC 500
24 VDC 1200
24 VDC 417
24 VDC 417
24 VDC 458
12 VDC 917
24 VDC 600
24 VDC 438
24 VDC 364
24 VDC 364
24 VDC 417
24 VDC 417
24 VDC 416
24 VDC 500
System Operation
Milliamp
123