Table of Contents
Advertisement
Cisco Aironet Four-Element, MIMO, Dual-Band Ceiling Mount Omni-Directional Antenna (AIR-ANT2524V4C-R)
Mounting the Antenna on a Ceiling Tile
Figure 2
Ceiling Tile Mounting Details
Nut
Ceiling Tile
To mount the antenna on a suspended ceiling tile:
1.
Mark the mounting location on the ceiling tile.
2.
Remove the ceiling tile from the ceiling grids.
3.
Use a 1" (2.54 cm) hole saw to cut a hole in the ceiling tile.
4.
Insert the antenna cables, one at a time, through the hole in the ceiling tile.
5.
Insert the antenna cables, one at a time, through the hole in the plastic nut as shown in
170
Ceiling Tile Mounting
Details.
Hide quick links:
Advertisement
Table of Contents
