Mounting On A Vertical Surface - Cisco 4G-ANTM-OM-CM Manual

Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R)

Mounting on a Vertical Surface

Follow these steps to mount your antenna on a vertical surface.
1. Attach the antenna bracket to the antenna using the jam nut provided
Figure 1 Antenna Bracket
2. With the screen mesh washer between the two brackets, attach the antenna bracket to the mounting bracket using the
spherical washer and wing bolt provided (Figure 2).
180
(Figure 1).