Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)
Figure 1
Cisco LTE-ANTM-SMA-D Omnidirectional Dipole Antenna, SMA Connector and Articulating Joint:
1
0° position
2
45° position
3
90° position
4
Articulating joint
Specifications
Table 1
Specifications of the LTE-ANTM-SMA-D antenna:
Operating Frequencies
Polarization
Nominal Impedance
Peak Gain
5
SMA connector
6
Dual green band
7
Product ID
698-960 MHz
1447-1511 MHz
1710-2690 MHz
Vertical, linear
50 Ohms
2.0 dBi (698-960 MHz)
2.8 dBi (1447-1511 MHz)
3.7 dBi (1710-2690 MHz)
Note:
The standalone antenna peak gain numbers are provided above. When you
install an antenna close to metallic objects or directly on chassis, the peak gain will
be affected. We recommend that you keep antennas away from very large chassis
and metallic objects. You can install antennas directly on smaller or medium size
chassis. In all cases, we recommend that you keep different antennas away from each
other and from various known sources of electromagnetic radiation.
513