Cisco Integrated 4G Low-profile Outdoor Saucer Antenna (ANT-4G-SR-OUT-TNC)
Tools and Equipment Required
In addition to the parts included in the antenna kit, you must provide the following tool to install the antenna on the router:
Phillips screwdriver
Open-end wrench
Drill
Marker or pencil
Installing the Antenna
Follow these instructions to install the antenna:
NOTE: The following example is for a CGR 1120 router with a CGM cellular module.
1.
Determine the installation location on the wall of the utility cabinet.
2.
Create the center hole to accommodate the threaded center rod and the three mounting holes of the saucer antenna.
Secure the antenna onto the ceiling with the 3 screws using a Phillips #2 screwdriver.
3.
From inside the utility cabinet space, secure the antenna.
376