Table of Contents
Advertisement
Cisco GPS Antenna (ANT-GPS-OUT-TNC)
Antenna Installation
Follow these steps to install the GPS antenna onto the router:
NOTE: These installation steps are for the CGR1120 router.
1.
Mount the antenna in its proper location by using the provided antenna bracket.
6
7
1
3
5
7
9
2.
Route and connect the LMR-100 cable to the TNC-to-N-connector adapter installed at the building entry panel.
3.
At the inside of the entry panel, install the LMR-100 cable to the N-connector on the adapter.
4.
Route the cable to the router and attach to the antenna connector.
1
2
3
4
5
GPS antenna
LMR-100 cable
Adapter, TNC connector (f)
Adapter, N-connector (f) to router
2" (outside dimension) pipe/mast
1
8
2
4
4
2
Mounting L-bracket
4
Right-angle TNC (m) connector
6
Building entry panel
8
VHT adhesive tape
10
U-bolt
404
3
9
10
Hide quick links:
Advertisement
Table of Contents
