Radio Frequency Specifications - Cisco 4G-ANTM-OM-CM Manual

Cisco 5-in-1 Vehicle Mount and Fixed Infrastructure Antenna (ANT-5-4G2WL2G1-O)

Radio Frequency Specifications

Table 1 Cellular Antenna Radio Frequency Specification
Specification
Antenna type
Frequency
Nominal impedance
VSWR
Gain
Isolation, cellular to cellular (Main to Aux)
Isolation, WLAN to cellular
Efficiency
Polarization
Radiation Pattern
Description
Dual element, omnidirectional, 2x2 MIMO

698 to 960 MHz

1448 to1511 MHz

1710 to 2700 MHz
50 ohms

2.1:1 maximum at 698 to 960 MHz

2.4:1 maximum at 1448 MHz edge, 2.2:1
typical at 1448-1511 MHz

2.0:1 maximum at 1710 to 2700 MHz
The gain values (dBi) for each frequency range
are:

2.4 dBi typical, 2.9 dBi maximum at 698 to
960 MHz

4.2 dBI typical, 4.8 dBI maximum at
1448-1511 MHz

4.9 dBi typical, 6.5 dBi maximum at 1710 to
2700 MHz

14 dB minimum-698 to 960 MHz

20 dB minimum-1448-1511 MHz

20 dB minimum-1710 to 2700 MHz

25 dB minimum-698 to 960 MHz

20 dB minimum-1448 to 1511 MHz

15 dB minimum-1710 to 2700 MHz
Antennas were designed and tested for high RF
efficiency in all supported cellular bands. Detailed
technical specifications can be obtained through
your Cisco authorized partner or Cisco account
representative.
Linear, Vertical
Omnidirectional
381