Gps/Gnss Antennas - Cisco 4G-ANTM-OM-CM Manual

Antenna Selection Table

GPS/GNSS Antennas

Part Number / Description
Cisco 5-in-1 Vehicle Mount and Fixed
Infrastructure Antenna (ANT-5-4G2WL2G1-O).
Transportation omnidirectional 5-element antenna
for 2G, 3G, 4G cellular, GPS, and dual-band WiFi
2.4 GHz and 5 GHz.
The ANT-5-4G2WL2G1-O integrated GPS RF
front end is designed to reject collocated RF
interference.
Note: The ANT-5-4G2WL2G1-O antenna is listed
under multiple antenna guide sections due to
support of multiple technologies.
Cisco Cellular and GPS 3-in-1 Vehicle Mount and
Fixed Infrastructure Antenna (ANT-3-4G2G1-O).
Three port antenna with two elements designed to
cover the 698-960, 1448-1511 and 1710-2700
MHz cellular bands and one GPS element.
The ANT-3-4G2G1-O antenna is listed under
multiple antenna guide sections due to support of
multiple technologies.
The ANT-3-4G2G1-O integrated GPS RF front end
is designed to reject collocated RF interference.
RF Connectors Antenna Frequency
Band Support and
Gain
Cellular – TNC 1 dBi zenith, plus
male 27dB amplifier gain
WLAN - RP-TNC 4G LTE 698-960,
male 1448-1511,
1710-2400,
GPS – SMA male
2500-2700 MHz
Plus 1 port GPS, and
2 ports for dual band
WiFi.
1575.42 +/- 1 MHz,
GPS L1
Cellular – TNC 1 dBi zenith, plus
male 27dB amplifier gain
GPS – SMA male Active GPS antenna,
1575.42 +/- 5 MHz
32
Industrial Products Where
Supported
Good fit for IR829.
Can be used with other
products such as IR809 or
IR807, but has extra WiFi
elements not required for those
products.
Instead consider
ANT-3-4G2G1-O for products
without WiFi.
IR807, IR809, and IR829
IR1101 with P-LTE cellular
module
C819HG-LTE and C819HG-4G
CGM-3G and CGM-4G
modules with CGR1120 router
CGR1120 use case requires
ANT-ADPTR-Q-TNC adapters,
as CGR1120 router has a
QMA(f) GPS connector, and
CGM-3G and CGM-4G
modules have QMA(f) cellular
connectors