Radio Frequency Specifications - Cisco 4G-ANTM-OM-CM Manual

Cisco Cellular and GPS 3-in-1 Vehicle Mount and Fixed Infrastructure Antenna (ANT-3-4G2G1-O)

Radio Frequency Specifications

Table 1 Cellular Antenna Radio Frequency Specification
Specification
Antenna type
Frequency
Nominal impedance
VSWR
Gain
Isolation
cellular to cellular (Main to Aux)
Polarization
Efficiency
Radiation Pattern
Table 2 GPS Antenna Radio Frequency Specifications
Specification
Antenna type
Frequency
Nominal impedance
VSWR
Amplifier Gain
DC current
DC voltage
Description
Dual element, omnidirectional, 2x2 MIMO

698 to 960 MHz

1448 to1511 MHz

1710 to 2700 MHz
50 ohms

2.1:1 maximum at 698 to 960 MHz

2.4:1 maximum at 1448 MHz edge, 2.2:1
typical 1455 to 1511 MHz

2.0:1 maximum at 1710 to 2700 MHz
The gain values (dBi) for each frequency range
are:

2.6 dBi typical, 3.8 dBi maximum-698 to 960
MHz

3.8 dBi typical, 4.3 dBi maximum-1448 to
1551 MHz

4.6 dBi typical, 5.5 dBi maximum-1710 to
2700 MHz

14 dB minimum-698 to 960 MHz

20 dB minimum-1448 to 1551 MHz

20 dB minimum-1710 to 2700 MHz
Linear, Vertical
Antennas were designed and tested to high RF
efficiency in all supported cellular bands. Detailed
technical specifications can be obtained through
your Cisco authorized partner or Cisco account
representative.
Omnidirectional
Description
Patch
1575.42 ± 1 MHz (GPS L1)
50 ohms
2.0:1 maximum
27 dB
20 mA maximum
2.7 to 12 V
295