Contents Of The Antenna And Bracket Kit - Cisco 4G-ANTM-OM-CM Manual

Cisco Aironet 2.4 GHz and 5 GHz Dual-Band Polarization-Diverse Directional Array Antenna (AIR-ANT2566D4M-R)

Install the antenna away from microwave ovens and 2-GHz cordless phones. These products can cause signal interference
because they operate in the same frequency range as the device to which your antenna is connected.

Contents of the Antenna and Bracket Kit

Figure 1 Contents of the Antenna Bracket Kit
4
2X
6
2X
1 One of two articulating mount flanges required for the
installation. The other flange comes attached to the back
of the antenna.
2 Articulating mount arm.
3 1/4 20 x 1.25-inch stainless steel screws. Two are
included in the kit.
4 1/4 inch flat washers. Two are included in the kit.
Dimensions of the Antenna and Brackets
The dimensions noted in the following illustrations are all in mm, unless noted otherwise.
2
5 2X
1
3 2X
5 1/4-inch split-lock washers. Two are included in the kit.
6 1/4-20 Hex nuts. Two are included in the kit.
7 one of two worm-gear type hose clamps. Each has a
range of 50–135mm
482
2X
7