Table of Contents
Advertisement
Use an appropriate socket or wrench to tighten the mounting bracket fasteners except the mast mount
Step 6
clamp fasteners.
a.
b.
Mounting the Antenna
Figure 2
top position. Depending on how your mast is configured, you may need to remove one of the mast mount
clamps in order to mount the antenna.
Figure 2
78-16403-01
Use a 7/16-in socket or wrench to capture the hex head bolt while you tighten the nuts.
Do not complete tighten the nuts. Tighten them just enough so the bracket remains positioned but
can be moved if necessary.
shows side and rear view of a typical mast installation. Note that the adjustable bracket is in the
Antenna Mounting Details
Cisco Aironet 14-dBi Vertically Polarized Sector Antenna (AIR-ANT2414S-R)
7
Advertisement
Table of Contents
