Radio Frequency Specifications - Cisco 4G-ANTM-OM-CM Manual

Cisco Multiband Panel Outdoor 4G MIMO Antenna (ANT-4G-PNL-OUT-N)

Radio Frequency Specifications

Figure 3 Antenna Radio Frequency Specification
Specification
Antenna type
Frequency
Nominal impedance
VSWR
Gain
3 dB beamwidth (vertical plane)
3 dB beamwidth (horizontal plane)
F/B ratio
Isolation
Efficiency
Polarization
Radiation Pattern
Antenna Radiation Patterns

698 MHz Antenna Radiation Pattern

880 MHz Antenna Radiation Pattern

960 MHz Antenna Radiation Pattern

1710 MHz Antenna Radiation Pattern
Description
4G directional panel, dual-polarized/MIMO

698 to 960 MHz

1710 to 2700 MHz
50 ohms
2.0:1 Maximum
The gain values (dBi) for each frequency range
are:

698 to 960 MHz—8.0 to 10.0 dBi

1710 to 2170 MHz—6.0 to 8.5 dBi

2200 to 2400 MHz—6.5 to 9.5 dBi

2500 to 2700 MHz—8.5 to 9.5 dBi

55 to 70 degrees—698 to 960 MHz

53 to 98 degrees—1710 to 2200 MHz

60 to 70 degrees—2200 to 2500 MHz

55 to 70 degrees—2500 to 2700 MHz

55 to 70 degrees—698 to 960 MHz

50 to 90 degrees—1710 to 2200 MHz
> 15 dB, typical 20 dB—698 to 960 MHz
> 17 dB, typical 23 dB—1700 to 2700 MHz
> 30 dB
Antennas were designed and tested to high RF
efficiency in all supported cellular bands. Detailed
technical specifications can be obtained through
your Cisco authorized partner or Cisco account
representative.
Slant +/- 45 degrees
Directional
350