Cisco 4G-ANTM-OM-CM Manual page 31

Antenna Selection Table
Part Number / Description
Cisco Integrated 4G Low-profile Outdoor
Saucer Antenna
(ANT-4G-SR-OUT-TNC).
Integrated 4G Low-profile Outdoor
Saucer Antenna.
Cisco 3G/4G LTE and LTEA
Omnidirectional Dipole Antenna
(LTE-ANTM-D).
LTE-ANTM-D is a high performance
indoor antenna for use in the 698-960,
1448-1511 and 1710-2690 MHz
frequency bands.
LTE-ANTM-D antennas have high
standalone efficiency, and maintain high
efficiency when directly installed on front
plate of a small or medium size Cisco
router. However, depending on chassis
size and a variety of other
electromagnetic considerations, installing
the antenna directly on the chassis is not
always recommended.
Cisco 4G LTEA, 4G LTE, and 3G
Omnidirectional Dipole Antenna
(LTE-ANTM-SMA-D).
LTE-ANTM-SMA-D is a high performance
indoor antenna for use in the 698-960,
1448-1511 and 1710-2690 MHz
frequency bands.
LTE-ANTM-SMA-D antennas have high
standalone efficiency, and maintain high
efficiency when directly installed on front
plate of a small or medium size Cisco
router. However, depending on chassis
size and a variety of other
electromagnetic considerations, installing
the antenna directly on the chassis is not
always recommended.
RF Connectors Antenna Frequency Band
Support and Gain
15 foot LMR 195 0.8 dBi 698-960 MHz
cable with TNC(m)
0.5 dBi 1448-1511 MHz
0.2 dBi 1710-2700 MHz
1 x TNC(m) 2 dBi, 698-960 MHz
2.8 dBi, 1447-1511 MHz
3.7 dBi, 1710-2690 MHz
1 x SMA(m) 2 dBi, 698-960 MHz
2.8 dBi, 1447-1511 MHz
3.7 dBi, 1710-2690 MHz
31
Industrial Products Where
Supported
IR807, IR809, and IR829
C819HG-LTE and
C819HG-4G
CGM-3G and CGM-4G
modules with CGR1120 and
CGR1240.
For CGM / CGR use case
adapters are required.
IR807, IR809, and IR829
C819HG-LTE and
C819HG-4G
CGM-3G and CGM-4G
modules in CGR1120 (with
additional adapters & cable
accessories)
IR1101 with P-LTE cellular
module