Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)
Tools and Equipment Required
Installing the Antenna
Tools and Equipment Required
In addition to the parts included in the antenna kit described in the section
install the antenna on the router:
A flathead screwdriver
3/4 in. open-end wrench
NOTE: This list does not include the tools and equipment required to assemble and erect the tower, mast, or other structure you
intend to mount your antenna on.
Installing the Antenna
The antenna is provided with a mounting kit consisting of a mounting bracket and hose clamp. This kit allows you to mount the
antenna to masts from 1.25 inches (3.2 centimeters) to 2 inches (5.1 cm). Cisco recommends that a 1.5 inch (3.8 centimeter)
or larger tubing mast be used.
The antenna is vertically polarized. Since the antenna has vertical gain, it is very important to mount the antenna in a vertical
(not leaning) position for optimal performance.
Follow these steps to mount the antenna onto a mast:
1.
Place the connector end of the antenna through the hole in the antenna bracket.
Antenna
Kit, you must provide the following tool to
344