Disabling A Network Connection - Honeywell Genesis Touch User Manual

3. Select the Wi-Fi Network to which you want to connect and select Connect at
4. If a password is requested, touch the blank space underneath the Enter
5. Select Connect when ready. A connecting message appears while it is
6. Press the Return key (
7. It is recommended to check the Status screen of the monitor, to ensure the Wi-

Disabling a Network Connection

Wireless Internet (Wi-Fi) settings are unique to each network connection, and are
remembered. This data may need to be cleared and re-entered before and after
every Genesis Touch monitor assignment.
To remove an existing Wi-Fi network connection:
Genesis Touch - User Manual
the confirmation window that appears, as shown below. When asked for a
password, continue to number 4:
Password text, as shown above on the right. A keyboard will appear to allow you
to enter data if it is not already visible. Select SYM to display the numeric
keypad on some monitors.
authenticating, then the monitor will return to the Wi-Fi menu with an indicator
that verifies Wi-Fi is connected.
Fi network is receiving a signal. Scroll down in the Status menu to confirm the
Internet section has "Wi-Fi" listed beside it.
) twice to return to the Settings screen.
89