Pairing A Welch Allyn Scale - Honeywell Genesis Touch User Manual

8. Once you select your device, a series of windows will quickly appear as the
9. Press the Back button. The Peripherals screen appears with identifying

Pairing a Welch Allyn Scale

1. Insert four fresh AA batteries into the bottom of the scale.
2. Ensure no weight measurements are taken prior to pairing. If a measurement
3. On the Genesis Touch, select the Add button (
4. Select Scale in the menu that appears.
5. In the Scale menu, select Device. The Device button is highlighted:
6. Select the No Device Paired check box.
7. Select the Welch Allyn scale type from the menu that appears, and tap OK.
8. On the back of the scale, press the Unit button once to power on the scale.
18
devices pair with each other, until the Genesis Touch returns to the Scale menu:
information from the paired scale:
has been taken, remove all batteries and reinsert them.
The Genesis Touch displays a pairing screen with instructions to pair the scale.
Follow all on screen directions to continue. Do NOT press the Back button on
the monitor, unless you wish to cancel pairing.
) from the Peripherals menu.
Genesis Touch - User Manual