Honeywell Genesis Touch User Manual page 37

Pairing Process:
1. Charge the oximeter or install fresh batteries into the device, as instructed by
2. On the Genesis Touch, select the Add button from the Peripherals menu (
3. Select Pulse Oximeter in the menu that appears.
4. A Pulse Oximeter screen similar to the following appears:
5. Select Device. The Device button is highlighted:
6. Place the oximeter on the middle finger of your left hand
7. On the Genesis Touch, select the No Device Paired check box.
8. Select the type of oximeter you are using. If you are using a Nonin device, select
Genesis Touch - User Manual
the manufacturer user manual.
like you would to take a reading with the Genesis Touch
(shown below). Do not remove the oximeter from your
finger until the device is paired.
If you are using a Contec device, press the Power button
on the pulse oximeter to turn it on.
the model number of the device. For help identifying your oximeter, refer to the
previous section and your manufacturer user manuals.
).
31