Honeywell Genesis Touch User Manual page 33

18. Continue to watch the monitor screen as it relays pairing information, until the
19. Press the Back button. The Blood Pressure screen appears showing the model
20. Select Back again. Remove the blood pressure cuff. Be careful not to
To retry pairing the blood pressure monitor:
1. If pairing has not succeeded, hold the Start button down on your A&D unit until
2. Briefly press the Start button again while "uPr" is still displayed.
3. When the monitor displays "End" you may try repairing your blood pressure
Genesis Touch - User Manual
screen says, "Pairing Succeeded."
and an identifying number of the blood pressure monitor that has been paired
(the last six letters & digits of the second barcode printed on the back of the
monitor).
accidentally hold down the Start button when transporting the blood pressure
monitor.
you see "uPr" displayed on the screen.
monitor with the Genesis Touch.
27