Honeywell Genesis Touch User Manual page 26

7. In the Scale menu, select Device. The Device button is highlighted:
8. Select the No Device Paired check box.
9. Select the A&D scale type from the menu that appears and tap OK:
10. In the Scale menu, select Start Pairing:
11. Select Yes, in the Bluetooth Permission Request window that appears:
12. Messages similar to the following will start to appear.
13. At this time, step on the scale. Remain still while standing
20
on the scale and do not step off until the unit beeps and a
circle is displayed in the top left of the scale display.
Genesis Touch - User Manual