Table of Contents
Advertisement
Configuring Monitors for Patients
Disabling a Network Connection
You must be out of range of the network to be able to remove it.
To remove an existing network connection:
1. From the Advanced Setting screen, select Wi-Fi Settings. A screen similar to the following appears
and networks that have been used in the past are listed under Detected Networks:
2. Select the network that you want to clear. If a network is out of range, a window similar to the
following appears:
3. Select Delete. The window disappears and the Wi-Fi Settings screen no longer has the network listed
under Wi-Fi settings.
4. Press the return key (
5. Press the return key (
3 - 30
) to back out of this screen.
) again. The Settings screen appears.
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14
Advertisement
Table of Contents
