Enabling Device Capabilities - Honeywell Genesis Touch User Manual

Selecting the Monitor's Language
To set the monitor's language:
1. From the General Setting screen, select Locale. A screen similar to the following
2. Check the box next to the language that you want the monitor to use. A check
3. Select the check box next to Use Metric if desired. A check mark appears in that
4. Select Back.
Note: If you have changed the language from English, proceed to instructions on Setting
the Vitals Collection Notification Volume from Enabling Device Capabilities, to
perform a test. This test is recommended after the language settings of the monitor
have been changed, in order to limit the possibility of patient monitoring disruption.
After you exit the Locale menu, navigate to General Settings and select the Device
menu (Dispositif in French, and Dispositivo in Spanish).

Enabling Device Capabilities

From the General Settings screen, tap the Device button
You will see the three menu options:
78
appears:
mark appears in that box to indicate that it has been selected (scroll down for
French by swiping up with your finger).
box to indicate that it has been selected.
.
Genesis Touch - User Manual