To Set Adjustable Alarm Thresholds Using The Icim; Alarm Threshold Menus - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 3 Operation Using the ICIM
ALARMS
Shelf
Slot
P2HD1.215TXM
InRF
MinL
Note: For details on all alarm parameters, see Module Parameter
Descriptions (on page 93).

To Set Adjustable Alarm Thresholds using the ICIM

You can use the ICIM to change the adjustable alarm thresholds of this
module from their factory default values.
At the MODULE menu, press the
1
on the ICIM LCD.
Press the
2
the label n/a is displayed, you cannot configure that alarm threshold.
Press the
parameter.
When the threshold that you wish to set is highlighted, press the
3
key.
Press the
4
Press the
5
Note: Press the Cancel (
Press the
6
appears on the ICIM LCD.
When finished, press the
7

Alarm Threshold Menus

Some typical alarm threshold menus are shown below.
56
ALARMS
Shelf 5
5
Slot 16
16
P2HD1.215TXM
OutPwr
MinH
SEL
key. The alarm thresholds previously set are displayed. If
q
key to highlight the alarm threshold for the next
q
key or the
Ì
key or the
ALRM
ENTER
key to save the changes. The message Data Saved
ALARMS ALARMS
Shelf
Shelf 5
Slot
Slot 16
P2HD1.215TXM P2HD1.215TXM
LasBias LasTemp
MajL MajH
STAT
key. The STATUS menu appears
p
key to change the increment size.
key to adjust the alarm threshold.
) key to return to the previous menu.
MAIN
key to return to the MAIN menu.
5
16
ENTER