Expired Password Or Inactive Password Messages; To Enter The User Password - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 3 Operation Using the ICIM
Press the
1
Use the
2
Press the
3
highlighted.
M A I N
O f f l i n e
M o d u l e s
0
A l a r m s
0
S c r o l l
M o d u l e
S h e l f
S l o t

Expired Password or Inactive Password Messages

The entry of a valid password allows changes to system parameters for a
period of 10 minutes. If more than 10 minutes has passed since your last
keystroke, and you attempt to make any changes to system parameters, the
menu displays Psw Expired. If, after more than 10 minutes, you attempt to
disable the password the menu displays Failed, Password Not Active. If
either of these messages is displayed, you are required to re-enter the
password. To re-enter the password, follow the procedure in To Enter the
User Password (on page 44).

To Enter the User Password

To use the user password feature, you must create and enter a password of
exactly eight digits using only the 0-9 number keys.
The password remains active for 10 minutes after your last keystroke. To
change configuration parameters after 10 minutes, you must re-enter your
password.
Complete the following steps to enter a user password.
Access the Password menu as shown in To Access the Password Menu (on
1
page 43).
Press the
2
44
ICIM
key.
q
key to scroll down until Password is highlighted.
SEL
key. The Password menu appears. User Psw is
I C I M
S h e l f 7 S h e l f
S l o t 1 5 S l o t
M f g D a t a
P a s s w o r d
I P S e t u p
U p d a t e A d r U p d a t e A d r
SEL
key. The user password menu appears.
I C I M I C I M
7 S h e l f
1 5 S l o t
M f g D a t a
U s e r P s w
S A P s w
P a s s w o r d
I P S e t u p
C h a n g e P s w
D i s a b l e
7
1 5
P s w
TP012