Host Module
A host module is required to mount high density application modules in a
standard Prisma II Chassis. The host module doubles the density of the
Prisma II Chassis by providing two high density module slots for each
current Prisma II slot. Its simple design allows for efficient routing of RF and
electrical signal between the chassis back plane and each high density
module.
Host Module Features
The host module has the following features:
Provides upper and lower slots for two high density modules
¾
Incorporates a passive design for high reliability
¾
Provides for RF and DC routing between the chassis back plane and each high
¾
density module
Host Module Illustration
Front View
Host Module
Back View
9