Configuring The Module Using The Icim; To Configure Parameters Using The Icim; Config Menus - Cisco Prisma II HD-LRMW Installation And Operation Manual

Configuring the Module using the ICIM

To Configure Parameters using the ICIM

You can use the ICIM to configure the parameters of this module.
From the MAIN menu, press the
1
Slot fields.
Press the
2
key or the
Press the
3
Press the
4
desired slot.
Press the
5
To configure the module, press the
6
Press the
7
controls until you find the parameter of interest.
Press the
8
Press the
9
the selected control.
Press the
10

CONFIG Menus

When the CONFIG menu is selected, the Shelf number field is highlighted.
The shelf and slot number fields may only be incremented with the
key or the
you exit the slot field, the Up and Down arrows will scroll through the
parameters that are specific to this module.
Sample CONFIG menus are shown below.
SEL
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
ENTER
key. The Slot field is highlighted.
Ì
key or the
ENTER
key. The MODULE menu appears on the ICIM LCD.
p
key or the
SEL
key to select the highlighted control.
Ì
key or the
ENTER
key to save the changes and return to the MAIN menu.
q
key. The
Configuring the Module using the ICIM
q
key to highlight the Shelf and
keys to scroll to the number of the
CFG
key.
q
key to scroll through the configurable
key to activate or change the value of
key highlights the Slot number field. Once
Ì
Ì
53