Icim Keypad - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 3 Operation Using the ICIM

ICIM Keypad

The ICIM keypad has 12 keys that allow you to input and monitor
operational parameters. Each key and a brief description of its function are
shown here.
Button
STAT
CFG
ALRM
p
q
SEL
ICIM
SHIFT
Ì
ENTER
MAIN
42
Function
Displays status information for the selected module.
Displays configuration information for the selected module.
Displays all of the parameters in alarm for a selected module.
Moves the menu selection area up. Also increases numerical readings of
selected configuration parameters.
Moves the menu selection area down. Also decreases numerical readings
of selected configuration parameters.
Selects the highlighted parameter.
Displays ICIM module information such as firmware version, serial
number, and baud rate.
Shifts function of a keypad button to the function or number label just
above that button.
Decreases numerical readings of selected configuration parameters.
Increases numerical readings of selected configuration parameters.
Enters input data (if valid).
Exits the current menu and displays the MAIN ICIM menu.