Cisco Prisma II HD-LRMW Installation And Operation Manual page 92

Chapter 4 Operation Using LCI
When finished, the "wizard" asks if you want to install the Silicon Labs
5
driver, which is required when using LCI with a node product.
¡
If you are using LCI with a node product, choose the Launch option,
click Next, and follow steps of the wizard to install the driver.
¡
If you are not using LCI with a node product, choose the Exit
Installation option and then click Next.
When finished, the InstallShield Wizard Complete screen appears as
6
shown in the following illustration.
68