Table of Contents
Advertisement
Chapter 1
Introduction
Back Panel Connectors
Blind-mate connectors make it easy to install this module. The push-on
connector on the back of the module mates with the back plane bus connector
inside the chassis or host module. This 55-pin connector and the RF connector
provide the following facilities.
RF signal connection
¾
Electrical power input connection
¾
Alarm communications connections
¾
Status-monitoring communications
¾
Communications and control connections
¾
The ESD guide pin near the bottom of the back panel serves as both a guide
pin and an ESD ground connection. The length of the pin ensures that ground
is the first electrical connection made as the module is inserted, and the last
connection to be broken as the module is removed.
8
Advertisement
Table of Contents
Troubleshooting
