To Change The User Password - Cisco Prisma II HD-LRMW Installation And Operation Manual

When User Psw/Shift Off appears, press the
3
On, and then enter the eight digits of your password, using the 0-9
number keys.
¡
To change a digit you have just typed, use the CAN (Cancel) function
by pressing the
Press the
4
show whether your password entry was accepted.
¡
If the password is accepted, the word Accepted appears in the menu,
and you are able to return to the MAIN menu.
¡
If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
– Entering more than eight digits for the password.
– Pressing keys other than the 0-9 number keys.
– Entering an incorrect password if a valid password has been
If the password is rejected, press the
password menu and re-enter the password as described in step 3
above.
I C I M
S h e l f
S l o t
U s e r P s w
S h i f t O f f

To Change the User Password

If a user password has been entered, it may be changed. However, the current
password must be active prior to changing it. If the current password has
expired (more than 10 minutes have passed since your last keystroke), you
must re-enter the current password before changing to a new one.
Access the Password menu as shown in the procedure To Access the
1
Password Menu (on page 43).
Use the
2
ALRM
ENTER
key to enter the password. The ICIM display updates to
entered.
I C I M
S h e l f 0
0
S l o t 1 5
1 5
U s e r P s w
* * * * * * * *
S h i f t O n
q
key to scroll down until Change Psw is highlighted.
key. This deletes the last digit typed.
SHIFT
I C I M
S h e l f
S h e l f 0
S l o t
S l o t 1 5
U s e r P s w
1 2 3 4 * * * *
R e j e c t e d
S h i f t O f f
ICIM Password
SHIFT
key to display Shift
key to return to the
I C I M
0
1 5
U s e r P s w
1 2 3 4 5 6 7 8
A c c e p t e d
S h i f t O f f
TP013
45