Adjusting Alarm Thresholds; To Adjust Alarm Thresholds - Cisco Prisma II HD-LRMW Installation And Operation Manual

Adjusting Alarm Thresholds

To Adjust Alarm Thresholds

This method for adjusting alarm thresholds lets you choose any valid
increment size and adjust the alarm threshold to any valid value.
You can use the ICIM to change the adjustable alarm thresholds of this
module from their factory default values.
At the MODULE menu, press the
1
on the ICIM LCD.
Press the
2
the label n/a is displayed, you cannot configure that alarm threshold.
Press the
parameter.
When the threshold that you wish to set is highlighted, press the
3
key.
Press the
4
Press the
5
Note: Press the Cancel (
Press the
6
on the ICIM LCD.
When finished, press the
7
key. The alarm thresholds previously set are displayed. If
key to highlight the alarm threshold for the next
key or the key to change the increment size.
key or the key to adjust the alarm threshold.
) key to return to the previous menu.
key to save the changes. The message Data Saved appears
key to return to the MAIN menu.
Adjusting Alarm Thresholds
key. The STATUS menu appears
61