Cisco Prisma II HD-LRMW Installation And Operation Manual page 13

CAUTION:
Installation of this equipment in a rack should be such that the amount of
airflow required for safe operation of this equipment is not compromised.
Elevated Operating Ambient Temperature
Only install this equipment in a humidity- and temperature-controlled
environment that meets the requirements given in this equipment's technical
specifications.
CAUTION:
If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient
temperature. Therefore, install this equipment in an environment
compatible with the manufacturer's maximum rated ambient temperature.
Handling Precautions
When moving a cart that contains this equipment, check for any of the
following possible hazards:
WARNING:
Avoid personal injury and damage to this equipment! Move any equipment
and cart combination with care. Quick stops, excessive force, and uneven
surfaces may cause this equipment and cart to overturn.
Use caution when moving this equipment/cart combination to avoid injury from
¾
tip-over.
If the cart does not move easily, this condition may indicate obstructions or
¾
cables that may need to be disconnected before moving this equipment to
another location.
Avoid quick stops and starts when moving the cart.
¾
Check for uneven floor surfaces such as cracks or cables and cords.
¾
Grounding
This section provides instructions for verifying that the equipment is
properly grounded.
Safety Plugs (USA Only)
This equipment may be equipped with either a 3-terminal (grounding-type)
safety plug or a 2-terminal (polarized) safety plug. The wide blade or the
third terminal is provided for safety. Do not defeat the safety purpose of the
grounding-type or polarized safety plug.
Important Safety Instructions
xi