Configuring The Module Using Lci; To Configure Parameters Using Lci - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 4 Operation Using LCI

Configuring the Module using LCI

To Configure Parameters using LCI

Using LCI, you can configure any module parameters that allow for such
changes.
In the module tree, right-click the module, and then click Details.
1
The Module Details window appears as shown in the following example.
Under Controls, double-click the parameter you want to configure. The
2
Change Value Dialog box appears. This example shows the dialog box for
the RF Drive Setting parameter.
78