Table of Contents
Advertisement
Redundancy Interface Panel
The Prisma II Redundancy Interface Panel is an accessory to the Prisma II
platform. It is intended to be used with the master/slave feature and the
contact closure alarm feature of the Prisma II platform.
The Prisma II Redundancy Interface Panel serves as an extension to the two
DB-37 connectors labeled ALARM IN and ALARM OUT on the connector
interface panel of the chassis. The terminals on the redundancy interface
panel are extensions of pins on the ALARMS OUT and ALARMS IN
connectors on the chassis.
For additional information, see the Prisma II Chassis Installation and Operation
Guide, part number 713375.
Prisma II Redundancy Interface Panel Illustrations
Front Panel
Back Panel
Close-up of Front Panel Terminal Strips
External Alarm Connections
35
Advertisement
Table of Contents
Troubleshooting
