Modifying Module Alarm Limits Using Lci; To Modify Alarm Limits Using Lci - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 4 Operation Using LCI

Modifying Module Alarm Limits using LCI

To Modify Alarm Limits using LCI

Using LCI, you can modify alarm limits for parameters that allow for such
changes.
In the module tree, right-click the module, and then click Details.
1
The Module Details window appears as shown in the following example. The
alarm limits are shown under Parameters.
Double-click the limit you want to change.
2
The Change Value dialog box appears as shown below. This example
3
shows the dialog box for the Optical Output Minor High Limit parameter.
82