Checking Module Alarms Using The Icim; To Check Alarms Using Icim; Alarms Menus - Cisco Prisma II HD-LRMW Installation And Operation Manual

Checking Module Alarms using the ICIM

To Check Alarms using ICIM

If the red ALARM LED on the front panel is blinking, a minor alarm
condition is indicated. If the ALARM LED on the front panel is illuminated, a
critical alarm conditions is indicated.
Alarms fall into one of the following categories.
Major low
¾
Minor low
¾
Minor high
¾
Major high
¾
From the MAIN menu, press the
1
Slot fields.
Press the
2
key or the
Press the
3
Press the
4
desired slot.
Press the
5
Press the
6
Use the
7
until the desired alarm is displayed.
Monitor the alarm condition(s). Take appropriate action. Verify that all
8
settings and thresholds relating to the alarm indication are set correctly to
rule out an unintended alarm.
When finished, press the
9

ALARMS Menus

When a module ALARMS menu is selected, press the
p
key to scroll through alarms. Some typical ALARMS menus are shown
below.
SEL
key to address the Shelf number. Then press the
keys to scroll to the number of the desired shelf.
ENTER
key. The Slot field is highlighted.
Ì
key or the
ENTER
key. The MODULE menu appears on the ICIM LCD.
ALRM
key. Module alarm conditions appear on the ICIM LCD.
p q
key or the
MAIN
Checking Module Alarms using the ICIM
q
key to highlight the Shelf and
key to scroll to the number of the
key to scroll through alarm conditions
key to return to the MAIN menu.
Ì
q
key or the
55