To Disable The User Password Using Icim - Cisco Prisma II HD-LRMW Installation And Operation Manual

Chapter 3 Operation Using the ICIM
Press the
3
When Change Psw /Shift Off appears, press the
4
Shift On, and then enter the eight digits of your new password, using the
0-9 number keys.
If at any time you input a digit that is incorrect or wish to change a digit, use
the CAN (Cancel) function by pressing the
Press the
5
¡
The ICIM updates the display to show if your password entry was
accepted or rejected.
¡
If the entry was accepted, you are able to return to the MAIN menu.
If the new password you entered is rejected, press the
6
to the password entry menu. Clear all digits using the CAN (Cancel)
function, then re-enter an 8-digit password using only the 0-9 number
keys. Press the
I C I M
S h e l f
S l o t
U s e r P s w
S A P s w
C h a n g e P s w
D i s a b l e
P s w

To Disable the User Password using ICIM

If a user password has been entered, you may disable it at any time. However,
the current password must be active prior to disabling it. If the current
password has expired (more than 10 minutes have passed since your last
keystroke), you must re-enter the current password before disabling it.
Press the
1
Use the
2
Press the
3
Use the
4
Press the
5
46
SEL
key to select Change Psw.
ENTER
key to input the new password. As a result:
ENTER
key to input the password.
I C I M
7 S h e l f 7
S l o t 1 5
1 5
C h a n g e P s w
S h i f t O f f
ICIM
key.
q
key to scroll down until Password is highlighted.
SEL
key.
q
key to scroll down until Disable Psw is highlighted.
SEL
key to select Disable Psw.
ALRM
key to delete that digit.
I C I M
S h e l f
S h e l f 7
S l o t
S l o t 1 5
C h a n g e P s w C h a n g e P s w
* * * * * * * * 8 7 6 5 4 3 2 1
S h i f t O n
S h i f t O n
SHIFT
key to display
SHIFT
key to return
I C I M
7
1 5
TP014