Important Safety Instructions - Cisco Prisma II HD-LRMW Installation And Operation Manual

Important Safety Instructions

Read these instructions. Keep these instructions. Heed all warnings. Follow
all instructions. Only use attachments/accessories specified by the
manufacturer.
Read and Retain Instructions
Carefully read all safety and operating instructions before operating this
equipment, and retain them for future reference.
Follow Instructions and Heed Warnings
Follow all operating and use instructions. Pay attention to all warnings and
cautions in the operating instructions, as well as those that are affixed to this
equipment.
Terminology
The terms defined below are used in this document. The definitions given are
based on those found in safety standards.
Service Personnel - The term service personnel applies to trained and qualified
individuals who are allowed to install, replace, or service electrical
equipment. The service personnel are expected to use their experience and
technical skills to avoid possible injury to themselves and others due to
hazards that exist in service and restricted access areas.
User and Operator - The terms user and operator apply to persons other than
service personnel.
Ground(ing) and Earth(ing) - The terms ground(ing) and earth(ing) are
synonymous. This document uses ground(ing) for clarity, but it can be
interpreted as having the same meaning as earth(ing).
Electric Shock Hazard
This equipment meets applicable safety standards.
WARNING:
To reduce risk of electric shock, perform only the instructions that are
included in the operating instructions. Refer all servicing to qualified service
personnel only.
Important Safety Instructions
vii