Table of Contents
Advertisement
Chapter 3 Operation using ICIM
Checking Module Alarms using the ICIM
To Check Alarms using ICIM
If the red ALARM LED on the front panel is blinking, a minor alarm condition is
indicated. If the ALARM LED on the front panel is illuminated, a critical alarm
conditions is indicated.
Alarms fall into one of the following categories.
Major low
Minor low
Minor high
Major high
From the MAIN menu, press the
1
2
Press the
the
3
Press the
4
Press the
5
Press the
Press the
6
7
Use the
desired alarm is displayed.
8
Monitor the alarm condition(s). Take appropriate action. Verify that all settings
and thresholds relating to the alarm indication are set correctly to rule out an
unintended alarm.
When finished, press the
9
56
SEL
key to address the Shelf number. Then press the
keys to scroll to the number of the desired shelf.
ENTER
key. The Slot field is highlighted.
key or the
ENTER
key. The MODULE menu appears on the ICIM LCD.
ALRM
key. Module alarm conditions appear on the ICIM LCD.
key or the
MAIN
key to highlight the Shelf and Slot fields.
key to scroll to the number of the desired slot.
key to scroll through alarm conditions until the
key to return to the MAIN menu.
key or
78-4019959-01 Rev D
Advertisement
Table of Contents
Troubleshooting
