Table of Contents
Advertisement
Chapter 3 Operation using ICIM
Configuring the Module using the ICIM
To Configure Parameters using the ICIM
You can use the ICIM to configure the parameters of this module.
1
From the MAIN menu, press the
Press the
2
the
3
Press the
Press the
4
5
Press the
6
To configure the module, press the
Press the
7
until you find the parameter of interest.
Press the
8
9
Press the
selected control.
10 Press the
CONFIG Menus
When the CONFIG menu is selected, the Shelf number field is highlighted. The
shelf and slot number fields may only be incremented with the
key. The
field, the Up and Down arrows will scroll through the parameters that are specific to
this module.
54
SEL
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
ENTER
key. The Slot field is highlighted.
key or the
ENTER
key. The MODULE menu appears on the ICIM LCD.
key or the
SEL
key to select the highlighted control.
key or the
ENTER
key to save the changes and return to the MAIN menu.
key highlights the Slot number field. Once you exit the slot
key to highlight the Shelf and Slot fields.
keys to scroll to the number of the desired slot.
CFG
key.
key to scroll through the configurable controls
key to activate or change the value of the
key or
key or the
78-4019959-01 Rev D
Advertisement
Table of Contents
Troubleshooting
