To Disable The User Password Using Icim - Cisco Prisma II 1550 nm Installation And Operation Manual

6 If the new password you entered is rejected, press the
password entry menu. Clear all digits using the CAN (Cancel) function, then re-
enter an 8-digit password using only the 0-9 number keys. Press the
input the password.
I C I M
S h e l f
S l o t
U s e r P s w
S A P s w
C h a n g e P s w
D i s a b l e
P s w

To Disable the User Password using ICIM

If a user password has been entered, you may disable it at any time. However, the
current password must be active prior to disabling it. If the current password has
expired (more than 10 minutes have passed since your last keystroke), you must re-
enter the current password before disabling it.
1 Press the
Use the
2
3 Press the
4 Use the
5 Press the
If the current password is active, the menu displays Password Is Now Disabled.
6
You can now make changes to parameters without any password.
78-4019959-01 Rev D
I C I M
S h e l f 7
7
S l o t 1 5
1 5
C h a n g e P s w
S h i f t O f f
ICIM
key.

key to scroll down until Password is highlighted.
SEL
key.

key to scroll down until Disable Psw is highlighted.
SEL
key to select Disable Psw.
I C I M
S h e l f
S h e l f 7
S l o t
S l o t 1 5
C h a n g e P s w C h a n g e P s w
* * * * * * * * 8 7 6 5 4 3 2 1
S h i f t O n
S h i f t O n
ICIM Password
SHIFT
key to return to the
ENTER
I C I M
7
1 5
TP014
key to
47