Redundancy Interface Panel; Prisma Ii Redundancy Interface Panel Illustrations - Cisco Prisma II 1550 nm Installation And Operation Manual

Redundancy Interface Panel

The Prisma II Redundancy Interface Panel is an accessory to the Prisma II platform.
It is intended to be used with the master/slave feature and the contact closure alarm
feature of the Prisma II platform.
The Prisma II Redundancy Interface Panel serves as an extension to the two DB-37
connectors labeled ALARM IN and ALARM OUT on the connector interface panel
of the chassis. The terminals on the redundancy interface panel are extensions of
pins on the ALARMS OUT and ALARMS IN connectors on the chassis.
For additional information, see the Prisma II Chassis Installation and Operation Guide,
part number 713375.

Prisma II Redundancy Interface Panel Illustrations

Front Panel
Back Panel
Close-up of Front Panel Terminal Strips
78-4019959-01 Rev D
External Alarms Connections
35