Modifying Module Alarm Limits Using Lci; To Modify Alarm Limits Using Lci - Cisco Prisma II 1550 nm Installation And Operation Manual

Modifying Module Alarm Limits using LCI

To Modify Alarm Limits using LCI

Using LCI, you can modify alarm limits for several parameters. Parameters whose
alarm limits you can change are listed below.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown below. The alarm limits are
shown under Parameters.
2 Double-click the limit you want to change.
78-4019959-01 Rev D

Modifying Module Alarm Limits using LCI

91