Search - Cisco 350 Series Administration Manual

Smart Network Application (SNA)

Search

STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
Search
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
User-Defined Tags
You can create new tags and add them manually to selected elements in the topology in the
Tags section of the right-hand information.
To create a new tag perform the following steps:
In the Tags section, click in the Add tag name text box and enter a tag name.
Click ADD+. The tag name is then displayed. The below shows that the tag first_floor has
been created.
You may add tags that have the same names as built-in tags. These tags appear similar to user-
defined tags and you can remove them at any time. Since these tags are distinct from the built-
in tags, it is possible for tags with the same name to appear twice on a single element as long
as one of them is user-defined and the other is built-in.
To add a tag to a device perform the following steps:
Select the device.
In the Tag section, click the Add tag name text box. A list of tags is displayed.
Select the tag to be applied to the device.
Use the search functionality to locate specific devices in the Topology view.
25
503