Cisco 350 Series Administration Manual page 534

Security: 802.1X Authentication
Overview
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Click Apply, and the Running Configuration file is updated.
Use the Copy Settings button to copy settings from one port to another.
Workflow 4: To configure the quiet period
Click Security > 802.1X Authentication > Port Authentication.
Select a port, and click Edit.
Enter the quiet period in the Quiet Period field.
Click Apply, and the Running Configuration file is updated.
Workflow 5: To configure the guest VLAN:
Click Security > 802.1X Authentication > Properties.
Select Enable in the Guest VLAN field.
Select the guest VLAN in the Guest VLAN ID field.
Configure the Guest VLAN Timeout to be either Immediate or enter a value in the User
defined field.
Click Apply, and the Running Configuration file is updated.
Workflow 6: To configure unauthenticated VLANs
Click Security > 802.1X Authentication > Properties.
Select a VLAN, and click Edit.
Select a VLAN.
Optionally, uncheck Authentication to make the VLAN an unauthenticated VLAN.
Click Apply, and the Running Configuration file is updated.
Workflow 7: To configure supplicant 802.1x on an interface
Click Security > 802.1X > Supplicant Credentials to configure supplicant credentials.
Click Security > 802.1X > Port Authentication.
Select the required port and click Edit.
Enable supplicant support and specify the credentials to use.
18
363