Cisco 350 Series Administration Manual page 482

Security
Management Access Method
STEP 1
STEP 2
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
• Action—Permit or deny access to an interface or source address.
• Interface—Which ports (including the OOB port), LAGs, or VLANs are permitted to
access or are denied access to the web-based configuration utility.
• Source IP Address—IP addresses or subnets. Access to management methods might
differ among user groups. For example, one user group might be able to access the
device module only by using an HTTPS session, while another user group might be
able to access the device module by using both HTTPS and Telnet sessions.
Access Profile
The Access Profiles page displays the access profiles that are defined and enables selecting
one access profile to be the active one.
When a user attempts to access the device through an access method, the device looks to see if
the active access profile explicitly permits management access to the device through this
method. If no match is found, access is denied.
When an attempt to access the device is in violation of the active access profile, the device
generates a SYSLOG message to alert the system administrator of the attempt.
If a console-only access profile has been activated, the only way to deactivate it is through a
direct connection from the management station to the physical console port on the device.
For more information see
Use the Access Profiles page to create an access profile and to add its first rule. If the access
profile only contains a single rule, you are finished. To add additional rules to the profile, use
the Profile Rules page.
Click Security > Mgmt Access Method > Access Profiles.
This page displays all of the access profiles, active and inactive.
To change the active access profile, select a profile from the Active Access Profile drop down
menu and click Apply. This makes the chosen profile the active access profile.
A caution message appears if you selected Console Only. If you continue, you
NOTE
are immediately disconnected from the web-based configuration utility and can access
the device only through the console port. This only applies to device types that offer a
console port.
Profile Rules.
17
339